Lapping and polish machine
Lapping Machine 18lnch-3R/VS

Lapping Machine 18lnch-3R/VS

We're here to help Easy ways to get the answers you need.
Contact Now
  • Lapping Machine 18lnch-3R/VS
  • Lapping Machine 18lnch-3R/VS
  • Lapping Machine 18lnch-3R/VS
  • Lapping Machine 18lnch-3R/VS

1)  Three conditioning rings
2) 18inch machine maximum lap dimension :  130mm ring 
3) Variable Speed  with control  system
4)  New design directly increases the life of the gearbox and ensure trouble free running for life. The gearbox is lubricated for life.

5) Compact Electrical and power panel with all switches, digital process timer, and digital rpm indicator。

Brief description:
Only manufacturer to design and provide a rigid Spindle Housing, hardened spindle with heavy duty bearings lubricated for life.
 The geared motor is attached to the bottom of the Spindle housing. The spindle shaft enters the gearbox and is firmly attached and secure.
The entire axial load from the top including the weight of lap plate, rings, dead weights/pneumatic pressure and all are taken up by the center plate and the bearings directly.
This design directly increases the life of the gearbox and ensure trouble free running for life. The gearbox is lubricated for life.
Standard Features:
- Power supply & Frequency can be customized.
- Bonfiglioli geared motor with an output of max 70 rpm, lubricated for life.
- 1 Hp, Telemecanique Variable Frequency drive to give stepless speed up to 70 rpm. ( Now as a standard feature).
- Slurry tray, with wiper, outlet pipe into the slurry tank directly kept inside the machine.
- Slurry pump, slurry divider, slurry flow regulator and outlet pipe on to the lap plate in case of abrasive lapping.
- Compact Electrical and power panel with all switches, digital process timer, VFD unit, etc.
-Complete powder coated and ready for startup.
Standard Toolings: 
- 1 no of Graded cast iron lap plate of diameter 465 mm approx.
- 3 nos of geared conditioning rings with id 170 mm.
- 3 nos of dead weights.
- 3 nos of felt pads.
- conditioning rings of height 70 mm approx with combo outer design, half plain and half geared for reversal.
- 3 nos of nylon side guide rollers.
- 1 no of Central Roller drum with gear for ring reversal.
Optional accessory :
-Pneumatic Lifting System for lifting dead weights
-Other lapping plate options: Copper plate, Compounded plate, Ceramic Plate.
Standard machine is equipped with cast iron lapping plate and not including pneumatic lifting system. Call our sales for prices of various plate options and pneumatic lifting system.
Weight & Dimensions:
DIMENSIONS L 122 x W 94 x H 112 CMS APPROX  

 How to choice the ideal polish and lapping machine ?

As you are already aware, machines for lapping/polishing mechanical seals basically divided into Soft Lapping / Soft polishing and Hard Lapping / Hard Polishing.
In Mechanical seals, you have seals of SS, Hardened steel, Coated like Stellite and some non-ferrous applications also. The lapping of these materials are usually by Abrasive slurry and polishing usually by 4/0 Emery sheet by hand, else with polishing pads and polishing slurries.
Hard lapping / Polishing – Usually referred to the use of Synthetic or Natural Diamond as abrasive. And again not all lapping or polishing application calls for the same abrasive.
And the selection of Vehicle or lapping media is very important.
For Carbon, SiC, TiC and Ceramic - the plates should be different, i.e. 3 plates, but again Ceramic if lapping and polishing is to be done, m/c's should be separate and plates separate for rough polishing and fine polishing.
With Paraflat, we have never given a quote to any customer off-hand, we always insist on knowing the details of the part/s to be lapped or polished, the previous operation, output quantity planned per shift of 8 hours, part drawings, etc. This practice helps us make a proper recommendation.

* For other lap plates of Copper, etc, if required, the prices will be different.
* Kindly also confirm the power supply details. 

Hence it is always better if the user/client’s requirement is known before hand to make a correct recommendation, else lot of time is spent making corrections and clarifications.

Get Price And Support

Simply complete the form below, click submit, you will get the price list and a representative will contact you within one business day. Please also feel free to contact us by email or phone.

Name: *
Country: *
Phone: *
E-mail: *
Message: *
Code: *
Contact Form
  • TDS Fluid Industries, LLC 7646 Pebble Drive Fort Worth, Texas 76118
  • TDS Fluid lndustries LLC. in TX,USA
  • Tel:1-817-616-3296(English)1-8882818150(Spanish)
  • TDS Fluid IndusTrIes Australia Pty Ltd. in Sydney,Australia
  • Tel:61-2-87640203(English)61-2-97081455(Spanish)
  • Shanghai TDS Industry Imp & Exp Corporation
  • Tel:021-60401444(English) 021-60190533(Spanish)
Copyright symbol ©